Normal bonded contamination
From $89 small / $109 mid / $139 oversize
60–120 min
Typical rail dust, sap haze and bonded road film after a proper wash.
Detailed add-on guide
Full Clay Bar & Paint Decontamination
Remove bonded contamination that washing leaves behind so paint feels smoother and is properly prepared for wax, sealant, polishing or coating.
Mobile serviceOxford & Norfolk CountiesBookable add-on
Transparent starting prices
Price by condition, not guesswork
Pricing basis: vehicle size; severe bonded contamination or overspray is quoted after inspection.
Heavy fallout / overspray
Inspection quote
2+ hr
Dense industrial fallout, paint overspray, stubborn sap or contamination that needs repeated chemical/mechanical decontamination.
Starting prices are in CAD before HST. Vehicle size and condition can change labour. Quote-required services are not finalized until the condition/scope is reviewed.
Why this service has its own page
- Customers searching for full clay bar & paint decontamination need to know whether they have a light maintenance problem or a restoration-level job before choosing a price.
- The workload can change with vehicle size; severe bonded contamination or overspray is quoted after inspection; this page explains the decision points instead of hiding them behind a single add-on number.
- A dedicated page lets us show process, limitations, condition photos, realistic time and a clear estimate path while keeping one focused H1 and one service intent.
Best fit for
- Designed for rail dust, industrial fallout, tree sap residue and bonded road film.
- Our normal workflow uses chemical decontamination where appropriate followed by lubricated clay-media work panel by panel.
- Starting price is only the lower condition tier; vehicle size; severe bonded contamination or overspray is quoted after inspection determine the confirmed price.
- Oxford and Norfolk County mobile service is planned around driveway/site access, weather, water/power rules and the time the vehicle actually needs.
How the process usually works
- 1. Condition review — photos help us identify the likely tier, but we keep the right to adjust after hands-on inspection.
- 2. Preparation — A contact wash is required first; the paint is inspected so clay is not used as a shortcut on unsafe or damaged surfaces.
- 3. Service work — Chemical decontamination where appropriate followed by lubricated clay-media work panel by panel.
- 4. Re-check — we inspect the surface/material after the first treatment cycle before deciding whether more aggressive work is justified.
- 5. Finish/protection — we complete the appropriate finishing, drying or protection stage instead of stopping at the visually dramatic middle step.
- 6. Handoff — we explain the result, remaining limitations, aftercare and what would be required if a deeper restoration is still wanted.
Equipment and workflow
- inspection lighting and condition photos to record the starting point
- cleaners/chemicals selected for the actual material and contamination rather than one universal product
- microfiber, brushes, pads, extraction/polishing/application tools appropriate to the service
- mobile water/power and containment/drying equipment where the job requires it
What’s included
- initial condition assessment and scope confirmation
- the normal labour and materials required for the accepted condition tier of full clay bar & paint decontamination
- result review and realistic discussion of remaining defects
- basic aftercare guidance
What is not automatically included
- unrelated repair work; overspray, severe sap or etched contamination may need additional correction and cannot always be solved by clay alone
- parts replacement, mechanical/electrical diagnosis, body repair or hazardous-material remediation unless explicitly quoted
- extra correction/disassembly discovered after work begins unless we stop, explain it and receive approval
Before we arrive
- A contact wash is required first; the paint is inspected so clay is not used as a shortcut on unsafe or damaged surfaces.
- Remove valuables and loose items that block the work area.
- Share photos and describe previous repairs/treatments or the cause of the problem when known.
Aftercare
- Protection is recommended after decontamination because the surface has been thoroughly cleaned and may have less existing protection.
- Keep the treated area clean and dry as instructed during any cure/dry period.
- Contact us if the original problem quickly returns; recurrence can indicate an untreated source, damage or maintenance issue.
When we pause and re-quote
Starting prices are tied to the visible condition tier. We confirm expanded work before proceeding.
- condition appears substantially worse than the starting-price tier
- the work would require disassembly, repeated extraction/correction cycles or a different product system
- physical damage, unsafe access, electrical/mechanical issues or hazardous contamination is discovered
- the requested result is not realistic without a different service or replacement/repair
Visual proof placeholders
Photos that will strengthen this service page
These spaces are ready for real Rosie Dazzlers before/after and process evidence as it is captured.
Photo needed
Close-up paint contamination before treatment and a clean reflective panel after decontamination.
Photo needed
One close process image that shows the actual tool/product stage without customer-identifying information.
Photo needed
One finished-result image shot from the same useful angle as the before image for honest comparison.
Things to know, avoid, and plan for
- Starting prices are in CAD before HST. Vehicle size and condition can change labour. Quote-required services are not finalized until the condition/scope is reviewed.
- Key limitation: overspray, severe sap or etched contamination may need additional correction and cannot always be solved by clay alone.
- Photos reduce surprises but do not always show depth, texture, saturation, paint thickness or hidden contamination.
- We would rather stop and re-quote than rush a severe job at a light-condition price.
- HST is additional unless a displayed checkout total explicitly says otherwise.
- Weather/site conditions can change whether a mobile process is appropriate on the scheduled day.
Frequently asked questions
How much does full clay bar & paint decontamination cost?
The current starting price follows the condition table on this page. Final pricing depends on vehicle size; severe bonded contamination or overspray is quoted after inspection. Quote-required jobs are confirmed after condition review rather than charged as a blind flat fee.
Can photos give an exact quote?
Photos are very useful for triage and often establish a likely range, but they can miss depth, texture, hidden moisture, paint condition or access issues. We confirm the scope before doing work outside the quoted tier.
How long will it take?
Typical added time is 60–120+ min. Severe conditions, drying/cure time or disassembly can extend the job.
Will it look brand new?
We aim for the best safe improvement, not an impossible guarantee. Overspray, severe sap or etched contamination may need additional correction and cannot always be solved by clay alone. We explain visible limits before escalating the process.
Can this be added to any package?
Compatibility depends on the add-on and the preparation already included in the main package. Booking will show the available path; we may recommend a different base package when the add-on would otherwise duplicate work or lack required preparation.
Ready to confirm the right scope?
Choose the service in booking and include useful condition details or photos. Severe or unusual conditions are confirmed before extra work is authorized.